Economy
Cold Knife
-
- We
first saw these on one of our trips to Germany and decided
to add them to our catalog. There are a couple of small
things you will have to become accustomed to. The pull
handle cable is longer than a regular cold knife and the
pull handle itself is shorter (narrower) than on a normal
cold knife, but we found these things caused no real
problems. The screws and bolts are metric size, but we keep
all the extra parts in stock if you wear one out. The price
is surprisingly reasonable for the quality of this product.
Comes with one blade.
Price Each...$14.95
|
|
THE SABRE
For cutting urethane deep below dashes and in inaccessible places.
Uses a standard utility blade and features a "quick
change" design that allows you to remove the old blade and
put in a new one in ten seconds. The unique design has a steel pin
that locks the blade in place. Many tools of this type have a wide
area where the blade locks in. Sabre has a width of only 1/8 inch.
This allows it to fit easily into any area below the dash. The
handle is long enough to accommodate both hands for a firm cutting
grip. Total length of the tool is 20 inches with the blade
installed. Comes with one blade. Made in USA.
Price
Each...$14.95
|
|
|
 |
 |
|
- MOLDING RELEASE TOOL
|
- Slide the tool left or right under the molding until it
hooks a retaining clip. Rock the tool with a twist of the
wrist to pull the clip out slightly. This releases the
molding from the clip. Heat treated, high carbon steel.
-
- Price
Each...$8.05
|
|
| Standard
Pinchweld Scraper
Used to remove urethane and butyl from the pinchweld. Our
pinchweld scrapers have a hardened steel blade that can be
sharpened dozens of times. The shank is long enough to keep
hands away from pieces of broken glass.
Price
Each...$10.95
|
|
|
|
72 foot roll
|
TightWire™
Auto glass shops have used wire to remove bonded glass ever
since manufacturers started gluing them in years ago.
Price
Each...$8.95
|